Zenith Chronomaster homages

One homage of the Zenith Chronomaster, drawn to scale beside it with price, movement and size.

38 mm across1 homage

See the homage

Zenith Chronomaster 03.3200.3600/69.C902 — The watch shown is the 03.3200.3600/69.C902. Homages follow other references too, so compare shape and scale.

How to recognise one

Five marks make the look. The count says whether the one homage keeps each one.

Tenth-of-a-second ring
A black ring round the dial is scaled to a tenth of a second and printed 1/10th of a second.
Three coloured registers
Three overlapping registers at 3, 6 and 9 in blue, light grey and dark grey.
Date at 4:30
A small date window sits between 4 and 5, edged by the ring.
Applied baton markers
Slim polished batons mark the hours on a white dial.
Crown and two pushers
A crown sits between two round pushers on the right of the case.

Each close-up covers about 12.5 mm of watch, using the listed case width and estimated photo edges.

The one homage

The only homage of the Zenith on Bewrist so far.

Sugess S419 Chrono Heritage
about £187 $249.99, seen 2 Oct37 mm
Lowest price. The lowest price listed here.

Original specifications

Sizes and specifications apply to the version named below. Other versions can differ.

03.3200.3600/69.C902Shown in the photograph

Assigned reference 03.3200.3600/69.C902.

Specifications for 03.3200.3600/69.C902
Specification	Value	Sources and notes
Case width	38 mm	Strap Guide: Zenith Chronomaster Original One cited source. Value is stated for reference 03.3200.3600/69.C902.
Lug to lug	47 mm	Strap Guide: Zenith Chronomaster Original One cited source. Value is stated for reference 03.3200.3600/69.C902.
Thickness	12.6 mm	Strap Guide: Zenith Chronomaster Original One cited source. Value is stated for reference 03.3200.3600/69.C902.
Lug width	19 mm	Strap Guide: Zenith Chronomaster Original One cited source. Value is stated for reference 03.3200.3600/69.C902.

Sources and unconfirmed details

Strap Guide: Zenith Chronomaster Original, read 2026-10-07
Access Denied, read 2026-10-07

95.L384.400/50.M384

Assignment names exact reference 95.L384.400/50.M384.

Specifications for 95.L384.400/50.M384
Specification	Value	Sources and notes
Case width	37 mm	Zenith Chronomaster Revival Lupin The Third Final Edition One cited source. One read source reports 37 mm for ref. 95.L384.400/50.M384; treat as a single-source figure.
Lug to lug	47 mm	Zenith Chronomaster Revival Lupin The Third Final Edition – Fratello One cited source. Fratello article for exact Lupin Final Edition/A384 case gives 47 mm lug-to-lug.
Thickness	12.6 mm	Zenith Chronomaster Revival Lupin The Third Final Edition – Monochrome Zenith Chronomaster Revival Lupin The Third Final Edition – Fratello Sources agree. Monochrome exact-reference specification gives 12.6 mm case height; Fratello also gives 12.6 mm including domed crystal.
Lug width	19 mm	Zenith 95.L384.400/50.M384 – Chrono24 dealer listing One cited source. Exact-reference dealer listing names serial 576 and lists 19 mm lug width. Its other dimensions/material conflict with Zenith, so use only this lug fit. Zenith confirms the Final Edition uses the original 1969 A384 case; 19 mm is the strap width documented for that case family.
Crystal	sapphire	Pre-owned Zenith El Primero Chronomaster Revival A384 Lupin Final Edition One cited source. One read source reports sapphire for ref. 95.L384.400/50.M384; treat as a single-source figure.

Sources and unconfirmed details

Thickness and lug dimensions were not present in read pages.

Zenith Lupin The Third Final Edition, read 2026-10-07T00:00:00Z
Zenith Chronomaster Revival Lupin The Third Final Edition, read 2026-10-07T00:00:00Z
Pre-owned Zenith El Primero Chronomaster Revival A384 Lupin Final Edition, read 2026-10-07T00:00:00Z
Zenith Chronomaster Revival Lupin The Third Final Edition – Fratello, read 2026-10-07T00:00:00Z
Zenith Chronomaster Revival Lupin The Third Final Edition – Monochrome, read 2026-10-07T00:00:00Z
Zenith 95.L384.400/50.M384 – Chrono24 dealer listing, read 2026-10-07T00:00:00Z

More about the Chronomaster

Lay a homage over the ZenithAny of the 1, laid over the original at one scale

Lay the Sugess S419 Chrono Heritage over the Zenith

Slide to fade from one watch to the other and compare the case shapes. The figures below describe the version shown in the photograph.

37 mm, 1 mm narrower than the Zenith
Zenith Chronomaster photo: 03.3200.3600/69.C902. Sugess S419 Chrono Heritage photo: S419-2.GSPS white dial, black registers, steel bracelet.

37 mm, 1 mm narrower than the Zenith
Zenith Chronomaster photo: 03.3200.3600/69.C902. Sugess S419 Chrono Heritage photo: S419-2.GSPS white dial, black registers, steel bracelet.

03.3200.3600/69.C902, specifications and sources

Zenith and the selected homage, measure by measure
Measure	Zenith	Sugess S419 Chrono Heritage
Case width	38 mm	37 mm
Lug to lug	47 mm	47 mm
Thickness	12.6 mm	13 mm
Lug width	19 mm	Not listed yet
Movement	Not listed yet	Seagull ST1902
Power reserve	Not listed yet	45 hours
Water	Not listed yet	50 m
Price	Not tracked here	about £187 $249.99, seen 2 Oct

Side view

Zenith

Sugess S419 Chrono Heritage

Copies

Not compared yet

Gives it away

No difference noted

Open the Sugess S419 Chrono Heritage

The references, in order2 references, with the homages that follow each

Which Chronomaster?

Every homage here follows one named reference. Select a reference to see its homages.

Chronomaster Original1 reference

03.3200.3600/69.C902Shown above38 mmNo homage yet

Chronomaster Revival Lupin the Third Final Edition1 reference

95.L384.400/50.M38437 mm1 homage

Compared and not kept3 watches left off the bench, with the reason

These watches were compared with the Zenith Chronomaster and left off the bench.

Cronos L6035Closer to another originalCompared with the Zenith Chronomaster Original
Ochstin GQ046Not checked yetCompared with the Zenith El Primero 36,000 VPH
Skmei 9117 moonphase calendarNot checked yetCompared with the Zenith El Primero moonphase chronograph design family